Specifications

Titan-Air Duct Product Data

WAVE LENGTH 280nm
LED UV Power 80 watts
Radian Flux 1,960 mW
Input Voltage 120-277,347v & 480v
Power Factor 0.9
Total Harmonic Distortion < 10%
Frequency 50/60
Light Beam Angle 130o
Operating Temp. Range 40o Ct0 60oC (-40oFto 140oF)
Application Disinfectant & Sterilization
Electrical Certification UL 1598
Connection Type Pig Tails
Surge Protection 6KV/4KV

BEAM ANGLE

INSTALLATION INSTRUCTIONS

Steps:
  1. Drill two hole of θ3/8″ or θ10 mm at a spacing oi 100mm or 3.93 inch for mounting bolts.(flat metal bar should be as long as the duct)
  2. Drill 1/2″ hole for the power cord and the rubber grommet(supplied)
  3. Pvt M10 bolt through the drilled mounting hole , add washer and M10” nut as shown. Tighten nut.
  4. Feed power cord up through the grommet.
  5. Attach a 120V plug to the cord or install an electric connection box